Stainless Steel Nitrogen Oil Removal Filter

Stainless Steel Nitrogen Oil Removal Filter

【1】Stainless Steel Nitrogen Oil Removal Filter Nitrogen Precision Filter Nitrogen Dust Removal Filter Introduction Description:

The stainless steel oil-water separation filter is a pressure filtration device. The raw liquid flows into the filter bag installed inside the screen through the inlet, under pressure, the qualified product permeates through the filter bag and is discharged from the outlet, entering the next process, while impurity particles are captured by the filter bag. The entire process is simple, and replacing the filter bag is convenient, with almost no material consumption.

Stainless Steel Oil-Water Separation Filter:

1. Large processing capacity, compact size, high dirt holding capacity.

2. Based on the working principle and structure of the bag filtration system, replacing the filter bag is quick and easy, and the filter requires no cleaning, saving labor and time.

3. Low probability of filter bag leakage, ensuring strong filtration quality.

4. The bag filter can withstand higher working pressures, with low pressure loss and low operating costs.

5. The filtration accuracy of the filter bag continues to improve, currently reaching 0.5μm.

6. The bag filter has a wide range of applications, suitable for various solid and liquid filtrations, flexible to use, and available in multiple installation methods.

Stainless Steel Compressed Air Sterilizing Filter

Interface: G1 Capacity: 1.5M³/min

Interface: G1 Capacity: 1.5M³/min

Interface: G1-1/2 Capacity: 1.5M³/min

Interface: G1-1/2 Capacity: 1.5M³/min

Interface: DN50 Capacity: 1.5M³/min

Interface: DN65 Capacity: 1.5M³/min

Interface: DN65 Capacity: 1.5M³/min

Interface: DN80 Capacity: 1.5M³/min

Interface: DN80 Capacity: 1.5M³/min

Interface: DN100 Capacity: 1.5M³/min

Filter Bag Material: Special filter bags; oil filter bags, oil absorption bags, activated carbon filter bags

Note: When selecting the model, choose the filter bag material according to the filtration temperature.

Applicable Materials: Paint, beer, vegetable oil, cosmetics, chemicals, petroleum products, textile chemicals, photochemicals, electroplating solution, milk, mineral water, hot solvents, latex, industrial water, sugar water, resin, ink, industrial wastewater, fruit juice, edible oil, waxes, etc.

▽ Main Performance

◆ Filtration Accuracy: 0.22μm and above, falling within the microfiltration category

◆ Filtration Efficiency: 99.9999%

◆ Flow Rate: ≥5 Nm³/min (0.1Mpa pressure, 0.01Mpa pressure difference 10")

◆ Steam Sterilization: Based on actual usage, steam temperature <140°C, 30 minutes/session. After 100 steam sterilization cycles or when the filter element pressure difference reaches 0.07~1.0MPa, replace with a new sterilizing filter element.

◆ Pressure Resistance: 0.2Mpa (forward pressure difference)

◆ Initial Pressure Drop: 0.005Mpa

◆ Length: 125mm (5"), 250mm (10"), 500mm (20"); Diameter: 70mm

◆ Filtration Area: 0.32mm (5"), 0.65mm (10"), 1.3mm (20"); Filtration Medium: PVDF membrane

◆ Inner and Outer Support: Heat-resistant polypropylene

▽ Features of the Sterilizing Filter

◆ The sterilizing filter adopts a cross-suspended design with horizontal inlet and outlet. Multi-core filters can be designed as floor-standing models.

◆ Airflow Direction: From outside to inside through the filter element.

◆ The compressed air entering the sterilizing filter must pass through at least three stages of precision filters and a dryer. Remove oil, water, and dust; oil mist concentration should be ≤0.01PPM, otherwise, it will affect the lifespan of the sterilizing filter element and the expected sterilization effect.

◆ Regular sterilization, based on actual usage, once or twice a week or month, 30 minutes each time, using clean saturated steam with a filtration accuracy of 1μm. Steam temperature <140°C, steam pressure <0.3MPa, 30 minutes/session. After 50 steam sterilization cycles or when the filter element pressure difference reaches 0.07~1.0MPa, replace with a new sterilizing filter element.

In summary, stainless steel filters are efficient and durable filtration equipment widely used in various industrial fields. Their high efficiency, corrosion resistance, wear resistance, and ease of cleaning and maintenance make them play an important role in the production process.

Our company's domestic brand filter elements are self-made replacement filter elements, using filter media imported from Germany's HV company, registered trademark "Jiajie". Other brands involved by our company have no brand significance and are only for model reference and usage guidance.